Digital Input Field Interface Module With LED and Fuse Protection
Applications :
Digital Field Interface Modules with Fuse and LED Indication in each path used to Interface between PLC/DCS Digital Inputs to field devices such as Proximity sensors, Limit Switch i.e. Potential Free contacts etc.
TECHNICAL DATA
Input Data (FIELD SIDE):
| Field Signal | 24VDC |
| Protection | Fuse in Each channel |
| Type of Connection | 2 Wire Interogaton Reading |
| Termination | Terminals |
| Indication/Chnl | LED |
Output Data (SYSTEM SIDE)
| System Signal | 24VDC |
| Protection | Fuse (Fuse Fail Indication) |
| Termination | Plug In Type D type Connector |
Isolation between input and output on request
Component Specification:
| Fuse | Glass Fuse(5x20mm) 100mA |
| Fuse Holder | Vertical / Horizontal |
| Terminals | Screw Type (2.5Sq mm) |
| PCB | Glass Epoxy Double Sided |
General Data
| No. of Channels | 16, 32 |
| Test Voltage | 500V, 50 Hz, 1M |
| Mounting | Universal Dinrail Mountable |
| Identification Tag | Optional (On request) |
Standards & Approval
| *PCB: Type tested STQC, IEC 61373, |
| *ANSI IPC 319 MIL 275B |
| *Terminals: UL/CE & CSA |
| *Ambient Opt Temp: | Max 60 Deg.C |
| *Relative Humidity: | Max 90% (Non-Condensing) |
| TYPE OF CARD |
Length |
Width |
| BRM16-DIF-D25 | 180 | X | 126 |
| BRM16-DI(WOF)-D25 | 100 | X | 126 |
